COP-USA CD66MK-HW - Manual (Page 4)

- 1 -
Notice
Please read this manual carefully, before you install and use the dome camera.
Electric safety
Please act on the national electric standard when you installing and using this product. To be sure
the power adaptor is original, it is DC12V/2A.
Transportation
The stress, strenuous vibration and water logging will damage the products under the
transportation, storage and installation. The integrity packaging can protect the product, otherwise
vendor will not pay for the damage.
Installation
Please install this product follow the manual, to take the camera module carefully, do not extrusion
the structure. The dome cover is an optical part, please do not touch it by hand.
Staff quality
Only the qualified serviceman or system installation people can install this product.
Do not take down the dome camera arbitrarily
Only the qualified serviceman or system installation people can take down the product.
Ambient requirement
Ambient Temperature: indoor 0
～+40 , outdoor -35 ～+55
Humidity: 10-75
％ Air pressure: 86-106kpa Power supply: DC12V/2A
Installation requirement
Please do not take arm the camera module to the bright objects, even the dome camera is
power off.
Please install the product on an enough tolerance position.
Please do not use the strong or abrasive scour to clean the dome, the neutral scour is accept.
Please do not use the indoor product in the outdoor place, the product will be damaged.
Please keep the enough distance from the RS485 wires to the high voltage equipment and
cable, and the protection of the lightning strike and surge is necessary.
Please do not try to repair the defective product, the trouble shooting can help you to find the
problem, and only the authorized service people can fix and repair the product.
Please use the only lens tissue to clean the camera lens.