COP-USA CD66MK-HW - Manual (Page 8)

- 5 -
II. Setup of the Menu of the Dome Camera
Basic Operation of the Menu
Open the main menu of the setup by the control keyboard or by the matrix via the operation “Call
No. 64 preset position or No.95 preset position”. Besides that, continuously test No.1 preset
position twice in 4 seconds, you can also open the menu; Through setting No.64 or No.95 preset
position in order to close the munu.
When the menu is displayed on the screen, operate “TILT UP”, “TILT DOWN” to move the
cursor to the option to be set, operate “PAN LEFT”, “PAN RIGHT” to modify the content or the
order to enter this option.
All setups on the menu couldn’t be lost even power failure happens.
2.1 MAIN MENU
SYSTEM SETUP: enter the submenu of the SYSTEM SETUP.
DISPLAY SETUP: enter the submenu of the DISPLAY SETUP, to
setup the ID DISPLAY, PRESET LABEL and so on.
CAMERA SETUP: enter the submenu of the camera common
parameter setup.
MOTION SETUP: enter the submenu of the dome enhancement functions.
PRIVACY MASK: enter the submenu of the camera PRIVACY MASK setup.
ADVANCE SETUP: enter the submenu of the ADVANCE SETUP.
SYSTEM RESET: to reset the dome camera.The dome camera will self test after the resetting,
and some settings of the dome will be restored: camera auto flip – ON, proportional panning
speed – ON, address display – ON, angle display – ON, display position – top of the screen,
dome title display – OFF, digital zoom – OFF, BLC – OFF, home
function – OFF, fan – AUTO, temperature display – OFF.
EXIT：exit from the Main menu.
2.2 SYSTEM SETUP
SYSTEM INFORMATION: enter the submenu of the SYSTEM
INFORMATION.
AUTO FLIP: to ON/OFF the dome camera auto flip function.
PROP PAN SPD: to ON/OFF the dome camera proportional panning speed function.
MAIN MENU
1.
2.
3.
4.
5.
6.
7.SYSTEM RESET
8.EXIT
SYSTEM SETUP
SYSTEM INFORMATION
1.SYSTEM INFORMATION
2.AUTO FLIP OFF
3.PROP PAN SPD OFF
4.RESERVED N/A
5.
6.RETURN
CAMERA SN:000000
CAMERA ID :001
PROTOCOL :P003
BAUD RATE :2400BPS
MODEL :S100P
VERSION :1.00