COP-USA CD66MK-HW - Manual (Page 21)

- 18 -
4.4 Preparation
4.4.1
Basic requirement
Please abide the latest electric, fireproofing and other related regulations.
Please check if all the accessories are complete, and if this product is the same with your
requirement. Please contact with the supplier if not.
Please install and use this product under the right ambient.
4.4.2 Please check there are enough room and intensity to install this product.
4.4.3 Please check the intensity of the structure.
4.4.4 To setup the dip switcher.
To setup the dip switcher as the right protocol, baud rate and dome ID. ( refer to the setup of
the dome.)
4.4.5 The self testing of the dome
Please make the self testing of the product first before we install this product, if this product can
not complete the self testing, please stop the installation and contact with the supplier.
4.4.6 Please keep all the package materials.
Please keep all the package materials, and if this product need to be sent back, it need to be packed
safety.
4.5 Brief of the Installation
There are two types of the SPEED DOME CAMERA as the installation ambient: Outdoor
speed dome camera and Indoor speed dome camera. And there are three types of the SPEED
DOME CAMERA as the installation manner: Outdoor wall installation, indoor wall installation and
ceiling installation. As follows:
a)
Ceiling installation
Figure 2 Figure 3