Checkline DT-209X - Manual (Page 60)

7. Measurement Data – measured values stored in each memory block is
displayed.
8. Block Tab – Memory block separation. Each tab corresponds to a set of
s or
left or right. Useful when screen is
10. nd Ave – quick summary of displayed data. Maximum,
11. of data displayed from the table.
of
ement. Format of display MM/DD/YYYY, followed by time in
13.
data stored per memory block. In Standard Mode, there are 24 Block
24 Tabs possible.
9. Scroll – Advances screen values
minimized.
Max, Min, a
minimum and average values are calculated and displayed per set of data
displayed from the software screen.
Records – number
12. Measurement Time – displays the time from the beginning to the end
each measur
the 24 hour format HH:MM:SS
Time – Synchronized time with the host computer.
56