BUCHI Interface I-100 - Manual (Page 36)

10 | Appendix BÜCHI Labortechnik AG
36/42 Operation Manual Interface I­100
10.2 Spare parts and accessories
u Use only genuine BUCHI consumables and spare parts in order to ensure correct,
safe and reliable operation of the system.
NOTE
Any modifications of spare parts or assemblies are only allowed with the prior written
permission of BUCHI.
10.2.1 Accessories
Communication cable
Mini­DIN, 0.6m
Connection between interface unit and vacuum pump 11060882
RJ45, 2m
Connection between vacuum controller/interface unit and recirculating
chiller or vacuum controller/interface unit and vacuum pump 044989
RJ45, 5m
Connection between vacuum controller/interface unit and recirculating
chiller or vacuum controller/interface unit and vacuum pump 11056240
Tubing
Natural rubber, Ø6/16mm, red, per m
Utilization: Vacuum 017622
Nyflex, PVC­P, Ø8/14mm, transparent, per m
Utilization: Vacuum, cooling media 004113
Further accessories
Cooling water valve. 24VAC
Valve opens cooling water feed during distillation, only used in combi­
nation with a vacuum controller/interface 031356
Power adapter. 30V, 30W, frequency 50/60Hz
To power Interface I­100 11060669
Support interface. Incl. connection tube, holder
To mount vacuum controller/interface on vacuum pump. Contents:
Holder, hose barbs, connection piece 11061448
Vacuum valve. 2.4mm, 24VDC
For use with a centralized vacuum source or an unregulated vacuum
pump, does not include condensate trap, only used in combination with
a vacuum controller/interface 031353
Valve unit Incl. Woulff bottle, 125mL, P+G, holder
The valve is only to use in combination with a vacuum controller/inter­
face 047160
Water jet pump, B­764. Magnetic valve, FFKM, 24V
Simple principle of vacuum generation, without cooling water valve, only
used in combination with a vacuum controller/interface 031358
Woulff bottle. 125mL, P+G, incl. holder
For trapping particles and droplets and for pressure equalization 047170