4 loading the factory calibration – BUCHI Interface I-100 User Manual
Page 29
BÜCHI Labortechnik AG
Operation | 6
Operation Manual Interface I100
29/42
6.3.4
Loading the factory calibration
This functions enables you to reset the calibration to the factory settings as supplied.
Any previously saved calibration settings will be deleted.
u
To reset the calibration to the factory settings as supplied, open the calibration
menu and select the option Load factory calibration.
The device asks you to confirm that the factory calibration should be reloaded.
u
Press the Yes button to confirm or the No button to retain the existing calibration
settings.