ALFA NETWORK AIP-W505 - Manual (Page 49)

– 49 –
6
I
NTERNET
S
ETTINGS
The Internet Settings pages allow you to manage basic system
configuration settings. It includes the following sections:
◆ “WAN Setting” on page 49
■
“DHCP” on page 50
■
“Static IP” on page 51
■
“PPPoE” on page 52
■
“PPTP” on page 53
■
“L2TP” on page 55
◆ “LAN Setting” on page 57
◆ “DHCP Clients” on page 59
◆ “Advanced Routing” on page 60
N OTE :
In Bridge mode, the 11n Router’s Internet Settings options are
significantly reduced, with only LAN Settings and the Client List being
available to the user.
WAN S ETTING
The WAN Setting page specifies the Internet connection parameters. Click
on “Internet Settings” followed by “WAN”.
◆ WAN Connection Type — By default, the access point WAN port is
configured with DHCP enabled. After you have network access to the
access point, you can use the web browser interface to modify the
initial IP configuration, if needed. The options are Static IP, DHCP (cable
modem), PPPoE (DSL modem), and PPTP. Each option changes the
parameters displayed below it. (Default: DHCP).