Step 3 - wan settings - pptp, Figure 19: wizard step 3 - wan settings - pptp – ALFA NETWORK AIP-W505 User Manual
Page 39

C
HAPTER
4
| Initial Configuration
Setup Wizard
– 39 –
11n Router, then click the “Clone your PC’s MAC Address” (Default:
Disable)
S
TEP
3 - WAN
S
ETTINGS
- PPTP
Enables the Point-to-Point Tunneling Protocol (PPTP) for implementing
virtual private networks. The service is provided in many European
countries.
Figure 19: Wizard Step 3 - WAN Settings - PPTP
The following items are displayed on this page:
◆
Server IP — Sets the PPTP server IP Address. (Default: pptp_server)
◆
User Name — Sets the PPTP user name for the WAN port.
(Default: pptp_user; Range: 1~32 characters)
◆
Password — Sets a PPTP password for the WAN port. (Default:
pptp_password; Range: 1~32 characters)
◆
Verify Password — Prompts you to re-enter your chosen password.
◆
Address Mode — Sets a PPTP network mode. (Default: Static)
◆
IP Address — Sets the static IP address. (Default: 0.0.0.0, available
when PPTP Network Mode is set to static IP.)