Connections, Tuning the tv to your vtr, Storing tv broadcasts into your vtr – Panasonic NV-SD10 Series User Manual

Page 5: Setting the clock of the vtr

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Connections

This tells you how to connect the VTR to an aerial, TV, etc.

Tuning the TV to your VTR

The VTR supplies a signal to the TV set via the RF coaxial
cable.

For Australia; on channel 0 or 1
For New Zealand: on channel 2 or 3

Storing TV Broadcasts into your

VTR

The VTR is fitted with its own TV tuner {just like a normal TV
set) and can be tuned to receive up to 99 TV broadcast
stations.

Setting the Clock of the VTR

The built-in clock is used to activate the timer for automatic
recording and must be set to the correct time.