To interrupt recording, To record one tv programme while, Viewing another programme – Panasonic NV-SD10 Series User Manual
Page 20: To display the approximate remaining, Tape time
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
On-the-spot Recording
§
To interrupt recording
Press PAUSE/STILL during recording.
Press again to continue recording.
PAUSE/
STILL
0
To record one TV programme while
viewing another programme
1 Refer to the on-the-spot recording operations steps 1
to 4,
2 Press VTR/TV to select the TV mode.
3 Select the TV programme on your TV set you wish to
view at the present time.
To display the approximate remaining
tape time
1 Press TAPE SELECT to select the corresponding
cassette tape length.
TAPE
SELECT
O
•E195; For E30, -60, -80, -120, -180 and -195 tapes.
£240; For E240 tape.
E260: For E260 tape,
2 Press DISPLAY.
DISPLAY
O
Notes:
•When a video cassette with a broken off tab is inserted,
the
“E3"
indication will flash to indicate that recording is
not possible.
• The recording pause mode will be automatically released
after 5 minutes.
21