Panasonic NV-SD10 Series User Manual

Page 34

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Before Requesting Service

Recording will not operate correctly

SYMPTOM

; CAUSE

REMEDY

GHECKED

Alarm sound is
produced and
indication Hashes
whenever recording

is attempted.

Erasure prevention tab on
cassette is broken off.

Use tape with intact erasure prevention tab, or cover

tab hole with adhesive tape, if original recording is no

longer required.

Picture is recorded

with noise or blank
screen.

Aerial or aerial lead is

defective.

Check aerial connection to VTR. See page 6.
Check your normal TV picture. If there is no picture,
check your aerial.

VTR is not correctly tuned.

Re-tune VTR. See page 8.
Ensure input selector set to TV programme.

Input selector is set to A1.

Select the required TV programme.

Timer recording
cannot be

performed.

Clock or calendar is
incorrectly set.

Check ciock and calendar. Set to present time.

(Note this is a 24 hour ciock.) See page 10,

Clock is flashing 0:00.

Set clock to present time.

Recording start or stop time
settings are incorrect.

Set recording start and stop time correctly. Try a short
timer recording a few minutes ahead of the present
time to confirm correct operation. See page 24.

VTR is not set for timer

recording.

Press TIMER REC after programming for timer

recording.

AV external

recordings cannot be
made.

Input selector is not correctly
set.

Select At.

External AV connections are
incorrect.

Check that connections for external video and audio
source are correct. See page 29.