Panasonic NV-SD10 Series - Manual (Page 13)

Controls and Connection Sockets
0 STOP
To stop any playback or recording.
0 EJECT
To eject a video cassette.
0 VTR/TV
To select the VTR mode or TV mode.
© Infra-red Remote Control Receiver Window
0 Display
0
V a /—h
To select the required programme position (TV
station).
To set the clock and timer recording,
0
NEXT
To proceed to the next item during setting procedure.
0 SLEEP/SHIFT
To set the time to turn off the VTR automatically.
To blank unoccupied programme position.
0
REC
To start a recording,
0 TUNER PRESET
To initiate TV station settings for the tuner,
^ 0 Shuttle Ring
In the stop mode: To re\wind or fast forward the tape.
In the playback mode:
To search picture backward or
forward.
In the still playback mode:
To adjust playback speed backward
or forward.
In the rewind or fast forward mode:
To obtain high speed picture.
0 © RFOUT
To connect to the aerial terminal on a TV set,
0 Video Playback Channel Selector
To select the video playback channel,
© TEST SIGNAL
The test signal is transmitted on channel L or H.
© AUDIO IN
To connect an audio cable to a video camera or
another video recorder,
® VIDEO IN
To connect a video cable to a video camera or another
video recorder,
© AUDIO OUT
To connect an audio cable to a TV or another video
recorder.
© VIDEO OUT
To connect a video cable to a TV or another video
recorder.
© RFIN
To connect to the external aerial.
© AC IN
To connect to the mam power supply.
C