To change the playback speed, To skip scene, To return to a specified scene – Panasonic NV-SD10 Series User Manual
Page 18: To playback a recorded part repeatedly, Other playback functions
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Playback
other Playback Functions
To change the playback speed
Using Shuttle Ring:
1 Press PAUSE/STILL.
PAUSE.
STILL
0
To obtain high speed picture during fast
forward or rewind
Keep FF pressed during fast forward.
Keep
REW pressed during rewind.
© /FF
REW/ei
2 Rotate Shuttle Ring.
#
Using Remote Controller:
1 Press SEARCH.
2 Press + or - repeatedly.
+: To increase the playback speed forward.
To increase the playback speed backward.
SEARCH
0—0-^
To skip scene
Press SKIP during playback.
SKIP
O
«The following 30 seconds will be skipped.
«Each press gives a 30 seconds time span up to 4 minutes.
•The same operation can also be performed by turning the
Shuttle Ring.
To return to a specified scene
1 Press RESET to set the counter to 0:00.00.
RESET
O
2 Press STOP after playback, fast forward or rewind.
3 Press ZERO STOP.
ZERO STOP
O
•The tape will be rewound or fast forwarded to 0:00.00.
To playback a recorded part repeatedly
Press REPEAT in the stop mode.
REPEAT
O
Beginning
of T ape
End of
Recorded Part
n
rr
n
Repeat Playback'
PLAY Control signal Interruption
(at least 5 sec.)
( )
REW
Note:
Cue, review or slow playback will be automatically released
after 10 minutes, and still playback after 5 minutes.
19