Panasonic NV-SD10 Series - Manual (Page 32)

Bar Code Operation
Daily Timer Recording
For this time setting, three day patterns can be selected:
@ Daily recording from Sunday to Saturday
Daily recording from Monday to Friday
@ Daily recording from Monday to Saturday
(SU-SA) (MO-FR)
□ □
(MO-SA)
□ llllllllll
Weekly Timer Recording
Trace the bar code for the day of the week in the
© EVERYWEEK column.
For example, SU (Sunday)
EVERYWEEK
O
Timer Recording from an External Signal
Source
If a timer recording is to be made from a signal source that
is connected to the Audio/Video input sockets, the “AV” bar
code in the CHANNEL column must be traced for the
programme.
Checking a Timer Programme
The VTR must be turned on, or the timer recording indicator
“III” is lit.
1 Trace the CHECK bar code.
2 Transmit the data to the VTR.
•To check the settings for the next timer recording, press
TRANSMIT.
CHECK
&
Cancelling a Timer Programme
The data for the timer recording must first be displayed.
1 Trace the CHECK bar code.
2 Transmit the data to the VTR.
3 Trace the CANCEL bar code.
4 Transmit the data to the VTR.
CANCEL
O'
[
1
-
9
Turning the Timer on and off
After programming a timer recording, the timer recording
indicator “[3” lights up, and the VTR can no longer be used
for normal recording and playback. To make it possible to
use the VTR, trace the TIMER ON/OFF bar code and
transmit to the VTR (the timer recording indicator “H” will
go out). To reactivate the timer again, trace the TIMER
ON/OFF bar code again and transmit to the VTR (the “S"
indicator will tight again).
TIMER ON/OFF
D-
33