Panasonic NV-SD10 Series - Manual (Page 14)

Infra-red Remote Controller
1
REW (REWIND)
In the stop mode: To rewind the tape.
In the playback mode: To search backward.
In the rewind mode: To obtain high speed picture,
"'■:r T’ is lit.
2
SEARCH
To adjust the playback speed backward or forward.
3
DISPLAY
To change the indication on the VTR Display.
|»Clock—>Counter^ Remaining Tape Time-------
1
4
RESET
To reset the tape counter (elapsed time) to "0:00.00".
•The tape counter is automatically reset to "0:00.00"
when a video cassette is inserted.
5
INDEX
For the index search function.
6 REPEAT
For the repeat playback function.
7 PROG
For timer recording by using the remote controller.
8 NEXT
To proceed to the next item during setting procedure.
9
RECORDING SP/LP
No function.
10 CANCEL
To cancel the settings made for a timer recording.
11 Bar Code Reading Section
After the Bar Code Reader is turned on, the tip lights in
red.
12 Programme Position Selector Buttons
•To select the programme positions.
MO-SA
©* su MO.S*
19: 0 - O - 0 -
•To programme a timer recording.
13
TAPE SELECT
To set the cassette tape length in order to obtain
correct indication of the remaining tape time.
E195: For E30, -60, -80, -120, -180 and -195 tapes.
E240; For E240 tape.
E260: For E260 tape.
14
SKIP
To start cue playback in 30 seconds interval during
playback.
• Each press gives a 30 seconds time span up to
4 minutes.
14