Panasonic WV-BS504 - Manual (Page 24)

• Display SET UP on the monitor screen.
If necessary, refer to Setup Menu Display on page 10 for details on
displaying the SET UP menu on the monitor screen.
• Move the cursor to AGC and select ON or OFF by using the joystick.
5. Gain Control Setting (AGC ON/OFF) Camera setting menu
^ * * SET UP **
CAMERA ID OFF *
ALC/MANUAL ALC »
SHUTTER OFF
AGC IONI
SENS UP OFF
SYNC INT
WHITE BAL ATW *
WIDE D-RAN6E OFF
MOTION DET OFF
AF MODE MANUAL*
RET SPECIAL *
\_____________________
6. Eiectronic Sensitivity Enhancement Setting (SENS UP)
• Display SET UP on the monitor screen.
If necessary, refer to Setup Menu Display on page 10 for details on
displaying the SET UP menu on the monitor screen.
• Move the cursor to SENS UP and select the desired electronic
sensitivity enhancement mode by using the joystick.
The electronic sensitivity enhancement mode changes as follows by
operating the joystick;
Camera setting menu
OFF X2 AUTO X4 AUTO — X6 AUTO X10 AUTO
•-XI6 AUTO — X32 AUTO^ OFF — X2 FIX X4 FIX —
^ X6 FIX X1Q FIX-^ X16 FIX-* X32 FIX---- 1
□
/-------------------------------- \
** SET UP **
CAMERA ID OFF *
ALC/MANUAL ALC *
SHUTTER OFF
AGC ON
SENS UP OFFj
SYNC INT
WHITE BAL ATW •
WIDE D-RANGB OFF
MOTION DET OFF
AF MODE MANUAL*
RET SPECIAL *
\
___________
/
7. Synchronization Setting (SYNC)
• Display SET UP on the monitor screen.
If necessary, refer to Setup Menu Display on page 10 for details on
displaying the SET UP menu on the monitor screen.
• Move the cursor to SYNC and select line-lock{LL) or internal(INT) by
using the joystick.
Important Notice:
1. The priority of SYNC modes is as follows;
1. Multiplexed vertical drive {VD2) {highest priority)
2. Line-lock (LL)
3. Interna! sync (INT) (lowest priority)
2. To use internal sync, select INT,
3. Whenever the vertical drive pulse (VD2) is supplied to the camera, the
camera sync mode is automatically switched to the multiplexed
vertical drive (VD2) regardless which sync mode is selected.
Camera setting menu
r -------------------------------- ---- \
** SET UP **
CAMERA ID OFF *
ALC/MANUAL ALC *
SHUTTER OFF
AGC ON
SENS UP OFF
SYNC lINT.
WHITE BAL ATW *
WIDE D-RANGE OFF
MOTION DET OFF
AF MODE MANUAL*
RET SPECIAL *
\
__________ _
/
Line-lock Sync Mode (LL)
• Display SET UP on the monitor screen.
(Refer to Setup Menu Display on page 10 for details on displaying the
SET UP menu on the monitor screen.)
• Move the cursor to SYNC and select LL by using the joystick, LL sync
mode is not available when the multiplexed vertical drive (VD2) pulse
is supplied.
• After selecting LL, press the CAM (SET) key.
The SYNC menu appears on the monitor screen.
Camera setting menu
** SET UP **
CAMERA ID OFF *
ALC/MANUAL ALC *
SHUTTER OFF
AGC ON
SENS UP OFF
SYNC ILL'.py
WHITE BAL ATW *
WIDE D-RANGE OFF
MOTION DET OFF
AF MODE MANUAL
RET SPECIAL *
- 2 2 -