Preset, E preset menu display, Notes – Panasonic WV-BS504 User Manual
Page 14: Position setting
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
■ Preset
e Preset Menu Display
1. Displaying the preset menu directly
(1) Move the cursor to PRESET 1 and move the joystick to the left or right to select the position number to
be set.
(2)
Press the CAM (SET) key.
The preset menu appears on the monitor screen.
2. Displaying the preset menu from the PRESET NUMBER SET menu
(1) Move the cursor to MAP* and press the CAM (SET) key.
The PRESET NUMBER SET menu appears on the monitor screen.
(2) Move the cursor to the position number to be set and press the CAM (SET) key.
The preset menu appears on the monitor screen. To display position number 33-64, move the cursor to
“33-64” in the iower left of the screen and press the CAM (SET) key.
Setup menu
PRESET NUMBER SET menu
/--------------------------------------------
>
*** SET UP MENU
PRESET fT*]
MAP*
HOME POSITION
15
SELF RETURN
lOMIH
AUTO MODE
OFF
LOCAL/REMOTE
LOCAL
CAMERA *
V____________________________
J
(
-----------------
* PRESET NUMBER
SET *
fli
2*
3*
4*
5*
6*
7*
8*
9*
10*
11*
12*
13*
14*
15*H
16
17
18
19
20*
21
22
23
24
25
26
27
28
29
30
31
32
ID!DOOR 1
33-64
RET
V
/
* PRESET
NUMBER
SET ■
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
ID:
1-32
RET
Notes:
• The * mark means the position number is preset.
• The character H means home position.
• The right side of ID: is the preset ID of the preset number \with the
cursor.
• Position Setting
1. Move the cursor to POSITION SET and press the CAM (SET) key.
The position set menu is displayed.
Preset setting menu
—
~\
PRESET N0.15*M
position
.
set
U
■k
PRESET ID
ON *
ALC/MANUAL
ALC *
WIDE D-RANGE
OFF
DWELL TIME
2S
SCENE FILE
1 *
RET DEL
\_______________________
-J
To set panning/tilting positions
Move the cursor to PUSH SET next to PAN/TILT and press the CAM
(SET) key. The setting menu appears.
Select
panning/tilting
positions
moving
the
joystick
up
and
down,
right
and left, and press the CAM (SET) key. The positions are set and the
screen returns to the position set menu.
Position setting menu
A
POSITION 15*H
PAN/TILT
5
push
ZOOM/FOCUS
-iPUSH SET
RET
FLOOR 1
DOOR
V_____________________________________
J
POSITION 15*H
PAM/.TILTj
ZOOM/FOCUS
^PUSH
SET
-•PUSH SET
lU_TI LT~ D/ L
FLOOR
1
DOOR
-
12
-