Memory stop function, Press the screen display button, Press the data or memory button – Panasonic AG7150 User Manual
Page 20: Press the ff or rew button, Cn 1=1 press the screen display button
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MEMORY STOP Function
1. Press the RESET Button at the
point to be automatically stopped.
■ The tape counter will be reset to “0:00:00”.
RESET MEJ^ORY
BEGIN
END
CD
□
□
Ш
Q)
(£
О
О
■О
ф
О)
o'
3
(Л
2. Press the SCREEN DISPLAY
Button.
■ The ON-SCREEN menu will be displayed on the TV monitor.
SCREEN DISPLAY SHIFT DOWN DATA
о о
3. Press the DATA or MEMORY Button.
■ Select the “MEMORY STOP" mode.
MEMORY STOP
BGN+0 : 00 : 00
END+0; 00; 00
SCREEN DISPLAY SHIFT DOWN DATA
or
(“-+000" lamp lights up in the counter.)
RESET MEMORY BEGIN END
cn
1=1
Press the SCREEN DISPLAY Button.
■ The normal picture will appear.
SCREEN DISPLAY SHIFT
DOWN
DATA
C^CD
CD
CD
Press the FF or REW Button.
■ When the FF or REW Button is pressed, the tape will be
wound and then stopped automatically around the tape
counter position “0:00:00”.
REW
FF
or
20
Notes
MEMORY STOP function is also available by just pressing the MEMORY Button at the position except “0:00:00”
after step 1 described above.
When finished with this function, be sure to select “MEMORY OFF" in step 3 described above. (“-»ООО" lamp goes
off in the counter.)