Panasonic DMR-T3030 - Manual (Page 44)

Using on-screen menus
c
.o
2
0)
&
■D
O
O
c
2
■O
JVideo menu ^ X
rTÜTl nyjiHa f»n*gl I VCD
■Audio
Item Content
Picture Normal:
Soft: Soft picture with fewer video arti­
facts
Fine: Details are sharper
Cinema: Mellows movies, enhances detail in
dark scenes.
User; You can make further adjustments.
See below.
MPEG-DNR (When any item other than “User" is
selected)
You can turn on and off the recom-
mended settings for 3D NR, block
NR, and mosquito NR.
ON*—* OFF
■ When “User” is selected
Select “Detail picture adjustment".
(“User-> [◄]-» [T]-¥ [ENTER])
I
rZ
loe umz
Contrast
1 Briqhtness
1 Sharpness
1 Color
Page 1/2 of “Detail picture adjustment”
Contrast Increases the contrast between light and
dark parts of the picture (-7 to -t-7).
Brightness Brightens the picture (0 to +15).
Sharpness Adjust the sharpness of the edges of the ver­
tical lines (-6 to -1-6).
Color Adjusts the shade of the picture’s color (-7
to -1-7).
Press [ENTER] to enter the setting.
Press [A] or [▼] until page 272 appears.
[Gamma
l3D NR OEiHnmi
1 Btock NR
Mosquito NR
Page 2/2 of “Detail picture adjustment”
0
Gamma Increases the brightness of the center
ranges to improve detail and contrast in dark
scenes (0 to -f-5).
3D NR Reduces overall noise (0 to -i-4).
Block NR Smoothes block noise (0 to 4-3).
Mosquito NR Reduces the smudging that appears around
contrasting sections of the picture (0 to -i-3).
When you have set “TV Type” to “480P” in
SETUP {->page14)
1 Etes
Picture ■GESSEOH
1 l;íEn
MPEG-DNR
i Video
Proqresslve KU Transfer
VAudiS
Item Content
Progressive ON: Enables progressive output
OFF: Disables progressive output
Transfer* Select the method of conversion for progres­
sive output to suit the type of material being
played (-»page 56, Film and video).
Autol (normal): For film material
Auto2: For film material (the same as
Autol, but able to convert 30-frame-
per-second progressive video.)
Video: For video material
■ Only applicable in cases where the “Progressive” function is ON,
■ Regarding Progressive Television Picture
Progressive image aspect (height to width ratio) is set at a standard
16:9. DVD video which has been set at 16:9 will be displayed cor­
rectly. However, 4:3 video material (-► below) will be stretched to the
right and left when displayed.
To view the picture at the right aspect
• For televisions that allow the aspect of progressive images to be
adjusted, use the function provided on the television and adjust as
necessary.
• For televisions which do not allow the aspect of progressive
images to be adjusted, please turn OFF “Progressive".
4:3 video materials are usually found
• In general television broadcasts (excluding some wide picture
broadcasts) and any pictures from discs that recorded such pro­
grams.
• In DVDs with a lateral ratio of 4:3 indicated on the jacket.
• Video CD pictures
Press [ENTER] to enter the setting.
RQT6636