Step 6 television operation, I operation, Step 6 – Panasonic DMR-T3030 User Manual
Page 15: Television operation
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

STEP 6
Television operation
2
DVD, TV
A ,
V,CH
+, -.VOLUME
You can control televisions by entering the remote control code.
1
Refer to the chart below for the code
for your television.
2
Press and hold [6, POWER TV] and
enter the two-digit code with the
numbered buttons.
• For example; 01, press [0] -* [1 ].
• Test by turning on the television and changing channels.
Repeat the procedure until you find the code that allows
correct operation.
una
• If your television brand is not listed or if the code listed for your
television does not allow control of your television, this remote
control is not compatible with your television.
• This remote control works with most recently manufactured televi
sions, but may not be able to control older models.
Code No.
Manufacturer
01
Panasonic/National QUASAR
02
Panasonic/National QUASAR
03
MAGNAVOX SYLVANIA PHILIPS (RC-5)
04
ZENITH
05
THOMSON RCA GE
06
SHARP
07
SHARP
08
SONY
09
TOSHIBA
10
SANYO FISHER
11
JVC
12
HITACHI
13
MITSUBISHI
14
SAMSUNG
15
GOLDSTAR/LG
16
GOLDSTAR/LG
17
GOLDSTAR/LG
18
SAMSUNG
19
SAMSUNG
'O
§
a
(n
Oj
.c
■tM
■fcil
Q)
I Operation
Point the remote control at the television.
Operation
Button
On and off
[6, POWER TV]
Video input mode
[TV/VIDEO]
Channels
(Switch [DVD, TV] to ‘TV".)
[
a
, V ,
CH]
or
Numbered buttons
Example;
Channel “5”: [0] -¥ [5]
Volume
[+, -, VOLUME]
-;RQT6636