Timer recording, Using vcr plus+ codes to make timer recording, 1 press [vcr plush – Panasonic DMR-T3030 User Manual
Page 30: 3 press [enter, 4 press [return, 5 press [(!), dvd power, To release the unit from recording standby, To stop recording when recording has already begun, Using vcr plus-f codes to make timer recording
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Timer recording
Preparation
• Ensure the clock (and guide channels for VCR Plus+ recording,
-►page 13) are set correctly.
• Insert a disc for recording (make sure there is enough room for the
program you are going to record plus a little extra).
Using VCR Plus+ codes to make timer
recording
Entering VCR PIus+ codes is an easy way of programming the unit
for recording. You can find these codes in newspapers and maga
zines. You can enter up to 16 programs up to a month in advance.
1
Press [VCR PlusH-].
■; -i'- n'
Press the numbered buttons to enter
the VCR Plus+ code.
Press [-^] to move back to correct a digit.
?iS3Kl!S?»
a m a s a m u m
3
Press [ENTER].
The timer recording setting screen appears. Confirm the pro
gram and make corrections if necessary using [ A , T ,
►].
..... ”■
e
£® .
The current recording mode (shown on the unit’s display) is
automatically selected. In case where the recording mode
has already been set to XP, the recording mode will be auto
matically changed to FR mode.
When you press [ENTER]
V
The timer recording list appears.
ai2$TUE12:53 PH
(iign fiDf- (ii3j
01
39
4/1H0N 4:ZDI^ 5:10PM SP
Naw Timer Praaram
0103?,
pm
CiiiM Q
Displayed if the recording can fit in the remaining space on
the disc.
Repeat steps 1-3 to program other recordings.
4
Press [RETURN].
The timer recording list disappears and the message “TURN
RECORDER OFF FOR TIMER RECORDING" is shown on
the television.
5
Press
[(!),
DVD POWER].
Ensure “E” lights on the unit’s display.
To release the unit from recording standby
If you want to record something else before the program start time,
for example:
Press [
c
!J, DVD POWER].
The unit turns on and goes out.
• Be sure to press [c!), DVD POWER] to return the unit to standby
mode before the scheduled recording time. Timer recording wilt
work only if is displayed.
To stop recording when recording has already
begun
Press [■], then [ENTER] within 5 seconds.
Recording stops. Recording standby is also canceled if there are
other timer recording programs. Be sure to press [tl), DVD POWER]
to put the unit on timer recording standby.
• The actual time recorded may be longer than the program itself
when television programs are recorded using VCR Plus-H.
• “Invalid Entry” is displayed when you enter the wrong code.
Reenter the code.
• “Alt timer programs are occupied." appears if there are already 16
programs.
RQT6636