Step 3 setting the channels and clock, To return to the previous screen, When you are finished – Panasonic DMR-T3030 User Manual
Page 11: If the unit couldn’t set the clock automatically, If the clock is an hour slower or faster, Step, Setting the channels and clock
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
STEP
3
Setting the channels and clock
3
3-4-5-
6-7-8
RETURN
In accordance with the Antenna System (TV or CATV) setting,
channels will be set as shown in the tables below.
• TV Mode
Band
Air
VHF
2-13
UHF
14-69
• CATV Mode
Band
Cable
VHF
2-13
CATV LOW BAND
95-99
CATV MID/SUPER BAND
14-36
CATV HYPER BAND
37-65
ULTRA BAND
66-94
100-125
SPECIAL CATV CHANNEL
1
Preparation
• Confirm that the antenna is connected correctly.
• Turn on the television and select the appropriate video input to
suit the connections to this unit.
1
Press [cb, DVD POWER] to turn the
unit on.
2
Press [SETUP] to show the menus.
Press [▲,
T ] to select “Channel” and
press [^].
Press [A, ▼] to select “Antenna Sys
tem” and press [ENTER].
Press
[ A , T ] to select “TV” or
“CATV” and press [ENTER].
TV:
TV broadcast (2CH-69CH)
CATV: CATV broadcast (1CH-125CH)
Press
[ A , T ] to select “Auto Channel
Setting” and press [ENTER].
AutolChannelV^CIocktSetting
Please push the ENTER key.
Press [ENTER].
Auto setting starts. This takes a few minutes, (To stop auto
channel setting, press [RETURN].)
If you have not set the clock, the unit will carry out Auto Clock
Setting. The time is displayed when finished.
Aul61Clocl([SetUnJjs:coflnplele
r wafe 1
8 Press [ENTER] to end the setting.
• After carrying out Auto Channel Setting, make sure you re-set
VCR Plus-i- guide channel (-»page 13) and Channel Caption
(-►page 54),
Notes on Auto Clock Setting
• If you connect the unit through a cable TV box or DSS receiver
(-►page 46) and the Auto Channel Setting is not able to find a
local PBS station, the Auto Clock Setting will not work properly. If
there is no local PBS channel in your area, set the clock manually.
• OST, Daylight Saving Time, shows the summertime setting,
• TIME ZONE shows the time difference from Greenwich meantime
(GMT).
EST=GMT-5, CST=GMT-6, MST=GMT-7, PST=GMT-8,
AST=GMT—9, HST=GMT—10, For other areas: xx hr
To return to the previous screen
Press [RETURN],
When you are finished
Press [SETUP],
If the unit couldn’t set the clock automatically
Refer to page 12, "Manual Clock Setting",
If the clock is an hour slower or faster
Refer to page 12, “Time Zone Adjust”.
If unnecessary channels are set or necessary
channels are not set
Refer to page 12, “Adding and deleting channels”.
1
2
(0
I
Q1
o
JROT6636