Panasonic DMR-T3030 - Manual (Page 26)

Changing audio pgj
You can change the audio being received or played.
During reception or play
Press [AUDIO].
How the type changes depends on when you press the button.
While receiving Multi-channel Television Sound
Stereo (MTS)
SAP ^ Mono Stereo
I___
Depending on the type of television broadcast and sound selected,
received and recorded sound is as follows:
Audio
selected
Television
broadcast
Stereo SAP Mono
Stereo
+SAP
Main
audio
(Stereo)*^
Secondary
audio
program
(SAP)*^
Main
audio
(Monaural)
Mono
+SAP
Main
audio
(Monaural)
Secondary
audio
program
(SAP)*"
Main
audio
(Monaural)
Stereo Stereo*' Stereo*' Monaural
Mono Monaural Monaural Monaural
Select “Mono" if reception is poor during a stereo broadcast.
If recorded in this mode, main audio is also recorded. Conse­
quently it is possible to choose between MAIN and SAP when
playing back.
e.g.: “Stereo" is selected
“{(” appears when the
unit is receiving the type
of audio you selected.
■ma
• If you alter the sound setting during recording, the sound will be
altered in the recording itself also.
• it will not be possible to alter the sound by pressing [AUDIO] in the
following cases:
- When a DVD-R is in the disc tray
- When recording mode is XP and LPCM has been selected in
the SETUP menu, Audio Mode for XP Recording (-►page 53).
• You cannot change audio type while recording with DVD-R or
recording on DVD-RAM with LPCM sound. You can use the
SETUP menus to select which audio type of an SAP broadcast is
recorded, either “Main" or “SAP" {-^page 53, Audio—Select MTS
for DVD-R or LPCM).
RQT6636