Panasonic DMR-T3030 - Manual (Page 31)

Manually programming timer recordings
You can enter up to 16 programs up to a month in advance. Each
daily or weekly program is counted as one program.
D Press [PROG/CHECK].
The timer recording list appears.
* Remaining Recording Time Г^58 SP1'
. HtCUKUINU-. ^ .. .. ЗИТиЕ 12:55PM
No IHAHffiL ■ DATE Otl ' -ОЕЕ^^ ЙЕ. CffiEt .
lai- MABt 3/26ТЧЕ 1:eOPM 2:Q0PM SP Enatel
______________Hew Timer Program______
SELECT-
- ■ ■■ ‘
. .-iMr У: ■■■ .
BlIBt/T REIltflli., " . ■
Press ESTER to store new
program.
A iine that is ready for programming is highlighted.
Press [ENTER].
The timer recording setting screen appears.
' ’ t i m e r ' Y ’ Y T
RECORDING,
'Remaining Rec'ortlihg Time Ц;58 S p 3
' ЗгаТИЕ 12;55PM
DATE. OH .. OFF MODE '
— i 4-^ ;-n
Pfease selClianDet.
SEIiCI 1 .
■V • < ■ » ■ ■ ■
Ms.*.-.-.-
0 - 0
I , , i :
Press [►] to move through the items
and change the items with [ A , T ] ,
• The current settings are shown each time you press [►].
• You may use the numbered buttons to enter the CHANNEL.
DATE, ON (Start Time), and OFF (Finish Time).
TIMER - '
RECORDING.
<: Remaining RecordingTimelJj58JPj.
. ■ 3/26TUE 12:55 №
r 'ПЛТС. ' nil ЛСГ JLinnC , ' .: 'CHAHNa.:..,;DATE- . on - oef - mode
• CHANNEL (Channel number and caption)
• DATE
Current date----->the day before one month latere
SUN-SAT->MON-SAT->MON-FRI^
WEEKLY SUN-—>WEEKLY SAT
• ON (Start Time)/OFF (Finish Time)
The time increases or decreases in 30-minute increments if
you hold the button.
• MODE (Recording mode ^page 19)
SP^XP^FR^EP->LP
^ Press [ENTER] when you have fin­
ished programming the timer.
The timer recording list reappears.
Ъс:ллЬп 1 ыл Rlsmainirig Recording Time 0:58 SPI'
- Зй6ТиЕ12:КРМ .
^ - HD СИАШ DATE OH OFF WIDE CHECK .
Displayed if the recording can fit in the remaining space on
the disc.
Press [▲, V] to select “New Timer Program” and repeat
steps 2- 4 to program other recordings.
@ Press [PROG/CHECK] or [RETURN].
The timer recording list disappears and the message TURN
RECORDER OFF FOR TIMER RECORDING" is shown on
the television.
® Press [(!), DVD POWER].
Ensure “El’’ lights on the unit’s display.
To release the unit from recording standby
If you want to record something else before the program start time,
for example:
Press [(!), DVD POWER].
The unit turns on and “ID" goes out.
• Be sure to press [(!), DVD POWER] to return the unit to standby
mode before the scheduled recording time. Timer recording will
work only if “El” is displayed.
To stop recording when recording has already
begun
Press [■], then [ENTER] within 5 seconds.
Recording stops. Recording standby is also canceled if there are
other timer recording programs. Be sure to press [O, DVD POWER]
to put the unit on timer recording standby.
Notes on timer programming
• When recording in FR mode, in cases where the space
remaining on the disc is insufficient, it may not be possible to
record to the finish of the program.
• The remaining time displayed is based on the current recording
mode.
• Approximately 30 seconds at the beginning of subsequent pro­
grams is not recorded when you use timer recording to record
subsequent programs to a DVD-R.
• If you set DST (Daylight Saving Time) to ON when manually
setting the clock (-+page 12), timer recording may not work
when summer switches to winter and vice versa.
• “El” flashes when the unit couldn’t go to timer recording
standby (e.g., a disc isn’t loaded, a disc that can't be recorded
to is loaded, or the disc is protected). Check the disc carefully.
O)
c
■s
RQT6636