Anti-theft system, Place the removable face plate into case, Install removable face plate – Panasonic CQ-DF602U User Manual
Page 47: Panel removal alarm
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Anti-Theft System
This unit is equipped with a removable face plate. Removing this face plate makes the radio totally inoperable.
The security indicator will blink.
Place the Removable Face
Plate into Case
O
Switch off the power of the unit.
© Remove the removable face plate. page 46)
© Gently press the bottom of the case and open
the cover. Place the face plate into the case and
take it with you when you leave the car.
Install Removable Face Plate
O
Fit the face plate with its left hole on one of the
pins provided on the main unit.
© Fit the other hold on the other pin applying
slight pressure.
O
Move the face plate up and down a few times to
make sure it is secure. Then close the front
panel and press down the right side of the face
plate until it clicks into plate.
Security Indicator
The security indicator blinks when the removable
face plate is removed from the unit.
Active the security function in the function settings,
page 34)
Panel Removal Alarm
This alarm sounds to warn you not to forget to re
move the panel before leaving your car. This func
tion is activated when the security indicator is on.
Caution:
• This face plate is not waterproof. Do not expose it to water or excessive moisture.
• Do not remove the face plate while driving your car.
• Do not place the face plate on the dashboard or nearby areas where the temperature rises to high level.
• Do not touch the contacts on the face plate or the main unit, since this may result in poor electrical con
tacts.
• If dirt or other foreign substances get on the contacts, wipe them off with a clean and dry cloth.
• To avoid damaging the front panel, do not push it down or place objects on it while it is open.
CQ-DF6Q2U
47