I.mindard, Accessories – Panasonic DMC-TZ2 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/654055/6/background.png)
'.''i.Mindard
Accessories
Part numbers are as of January 2007
■Do a test
shot
first!
• Check first to see if you can take
pictures and record sounds {motion
pictures/pictures with audio)
successfuily.
IWe will not compensate for failed/
lost
recording or for direct/indirect
damage.
• Panasonic will not provide
compensation even if damage is
caused by faults with camera or card.
■Certain pictures cannot be played
back
• Pictures edited on a computer
©Pictures taken or edited on a different
camera
(Pictures taken or edited on this camera
may also not be able to be played back
on other cameras)
■Software
on the CD-ROM supplied
The following actions are prohibited:
• Making duplicates (copying) for sale or
rent
• Copying onto networks
■LCD monitor characteristics
Extremely high precision technology is
employed to produce the LCD monitor
screen. However there may be some dark
or bright spots (red, blue or green) on the
screen. This is not a malfunction.
The LCD monitor screen has more than
99.99% effective pixels with a mere
0.01% of the pixels inactive or always lit.
The spots will not be recorded on pictures
on the built-in memory or a card.
■Avoid shocks, vibration, and pressure
#Avoid exposing the camera to strong
vibration or shock; e.g. dropping or
hitting the camera, or sitting down with
the camera in your pocket.
• Do not press the lens or the LCD monitor.
■Do not get the camera wet or insert
foreign objects
• Do not expose the camera to water,
rain, or seawater.
(If camera gets wet, wipe with a soft,
dry cloth. Wring cloth thoroughly first if
wet with seawater, etc)
•Avoid exposing lens and socket to dust
or sand, and do not allow liquids to leak
into gaps around buttons.
■Avoid condensation caused by sudden
changes in temperature and humidity
• When moving between places of
different temperature or humidity, place
camera into a plastic bag and allow to
adjust to conditions before use.
• if the lens clouds up, switch off the
power and leave for about two hours to
allow camera to adjust to conditions.
• if the LCD monitor clouds up, wipe with
a soft, dry cloth.
'imm
*
LCD monitor
■
■I®
IWhen transporting
□ Battery Pack
• Switch off power.
CGA-S007A
We recommend using a genuine leather (P.14)
case (DMW-CT3, sold separately).
sunlight.
• If dirty, clean with soft,
dry cloth.
■Optional
accessories (P.96)
• Cards are optional. You can record
or play back pictures on the built-in
memory when you are not using a card.
(P.26)
• If any accessories are lost, customers
in the USA should contact Panasonic’s
parts department at 1 800 833-9626
and customers in Canada should
contact 1 800 99-LUIVIIX (1-800-995
8649) for further information about
obtaining replacement parts.
(referred to in this manual as ‘battery’)
DBattery Charger
DE-A45B
(P.14)
(referred to in this manual as 'charger')
D Battery Carrying
Case
VYQ3680
(P91)
D Strap
VFC4090
(P.12)
’’
'//
10
VQT1B61
DUSB
Connection
Cable
K1HA08CD0007
^ ■
(P.74, 76)
□ AV Cable
K1HA08CD0008
(P.79)
■
□ CD-ROM
The following software on the CD-ROM
is referred to in this manual as 'supplied
software’.
• LUMIX Simple Viewer
«PHOTOfunSTUDIO -viewer-
VQT1B61
11