Panasonic DMC-TZ2 - Manual (Page 18)

Applications
(Record) IIM
Make it easier to see the LCD monitor when taking pictures from high positions or in
bright outdoor conditions.
Display ‘LCD MODE’
DISPLAY
Hold down
LCD MODE
Select mode
•RdHiGH ANGLE
• POWER LCD
Makes screen brighter than normal (for
outdoor use).
HIGH ANGLE
Makes screen easier to see when taking
pictures from high positions.
(becomes harder to see from the front)
• OFF: Normal
HIGP. AKG_E
Note ')
•‘HiGH ANGLE’ will be canceled when power is turned off (including POWER SAVE).
# Block out sunlight (with hand, etc) if reflection makes screen difficult to see.
• ‘HIGH ANGLE’ cannot be used in the following cases.
»SIMPLE MODE
«PLAYBACK mode
«PRINT mode
«During menu screen display
«While reviewing pictures
• ‘POWER LCD’ will be deactivated if no operations are performed for 30 seconds while
recording. (Brightness can be restored by pressing any button)
* Brightness/color of screen in ‘LCD MODE’ has no effect on pictures recorded.
AppHcMphs-
;(’R;fccord:]pt
Till ding picture“' ” iiiL. ' df 'dimer
This is also effective for correcting jitter when pressing the shutter button, by setting the
self timer to 2 seconds.
Display ‘SELFTIMER’
elect time duration
I ft
Displayed for approx. 5 sec.
• Can also be selected with
Adjust focus
, -'JT ■ F o c u s will be automatically
' adjusted immediately before
Fiess recording if shutter button is
■'■ri ‘v.av pressed fully here.
Take a picture
I
Press
Self-timer indicator
#The self-timer indicator will flash, and the
picture will be taken after the selected
duration of time has elapsed.
•To cancel while in operation: Press
'MENU/SET
( Note ~)
34
VQT1B61
#This function cannot be used in the ‘UNDERWATER’ scene mode or in MOTION
PICTURE mode H.
• in some modes, only ‘2SEC.’ or only ‘10SEC.’ may be selected.
SIMPLE MODE: ‘10SEC.’
CLIPBOARD mode, SCENE mode ‘SELF PORTRAIT’: ‘2SEC.’
VQT1B61
35