Panasonic DMC-TZ2 - Manual (Page 3)

-If you see this symbol- About the battery charger
Information on Disposal in other
Countries outside the European
Union
This symbol is only valid in the
European Union. If you wish to discard
this product, please contact your ioca!
authorities or dealer and ask for the
correct method of disposal.
About the battery pack
Battery pack (Lithium ion battery pack)
• Use the specified unit to recharge the
battery pack.
• Do not use the battery pack with
equipment other than the specified
unit.
• Do not get dirt, sand, liquids, or other
foreign matter on the terminals.
• Do not touch the plug terminals (+ and
-) with metal objects.
• Do not disassemble, remodel, heat or
throw into fire.
If any electrolyte should come into
contact with your hands or clothes, wash
it off thoroughly with water.
If any electrolyte should come into
contact With your eyes, never rub the
eyes. Rinse eyes thoroughly with water,
and then consult a doctor.
CAUTION!
DO NOT INSTALL OR PLACE THIS
UNIT IN A
BOOKCASE, BUILT-
IN CABINET OR IN ANOTHER
CONFINED SPACE. ENSURE THE
UNIT IS WELL VENTILATED. TO
PREVENT RISK OF ELECTRIC
SHOCK OR FIRE HAZARD DUE
TO OVERHEATING, ENSURE
THAT CURTAINS AND ANY
OTHER
MATERIALS DO NOT OBSTRUCT THE
VENTILATION VENTS.
Battery charger
This battery charger operates on AC
between 110V and 240 V.
But
• in the U.S.A. and Canada, the battery
charger must be connected to a 120V
AC power supply only.
• When connecting to an AC supply
outside of the U.S.A. or Canada, use
a plug adaptor to suit the AC outiet
configuration.
( Note )
Example screens displayed in this manual are for DMC-TZ3 model.
DMC-TZ2: E m
Quick start guide
The battery is not charged
when the camera
is
shipped. Charge the
battery and set the clock
before use.
When you do not use the
card (sold separately), you
can record or play back
pictures on the built-in
memory (P.26).
Insert the battery
and the card
1. Set the mode dial to [g.
2. Select the picture
you want to view.
Previous Next
VQT1B61 VQT1B61