Panasonic DMC-TZ2 - Manual (Page 27)

Applications
(Record) t M , \ t t
Set picture quality for motion pictures (P.47).
■Applicable modes: H
■Settings:
Aspect ratio : ¡30fpsVGA| 1 10fps VGA / 30fps QVGA / 10fps QVGA
^:!30fps1^/10fps16:9
#‘30fps’: smoother movement; iDips’: longer recording time
Set size of picture. Number of pictures v/hich can be recorded depends on this setting
and on ‘QUALITY’ (see right). (P.92)
• Picture size setting guide
Larger picture size = Crisper picture
(lower recording capacity)
Smaller picture size = Coarser picture
(higher recording capacity)
■Applicable modes:
■Settings:
SCN1SCN2
ASPECT RATIO Picture size
|7M |*’ 3072 x 2304 5M E*2 2560x 1920 3M ® 2048x 1536
2Mffi 1600x 1200 1M [S 1280x960 0.3M ® 640x480
|7M|*5 3216 x 2144 4.5ME 2560 X 1712 2.5M ® 2048x 1360
mm
[Wl’’“* 3328x 1872 3.5M1B 2560 X 1440 2M [B 1920x 1080
• Picture sizes for DMC-TZ2 model are as follows.
*L 6M (2816x2112) : None : 6M (2976 x 1984) 5.5M (3072 x 1728)
• Extended optical zoom (P.27) can be used for picture sizes indicated with [S.
is not displayed in the ‘HIGH SENS.’ scene mode (P.44) (as extended optical
zoom cannot be used).
• Mosaic effect may appear depending on subject and recording conditions.
Set compression ratio for saving. Number of pictures which can be recorded depends on
this setting and on ‘PICT.SiZE’ (see left). (P.92)
■Applicable modes: SCN1SCN2
■Settings:
: Fine (priority to picture quality)
m : Standard (increases recording capacity by limiting standard picture
size and picture quality)
^1
Sounds can also be recorded with pictures. This is useful for conversation or memo
recording.
■Applicable modes: SCN1SCN2
■Settings:
|QFF| :No sound recording
ON : Record approx. 5 seconds of sound { D displayed on screen)
• To cancel recording: Press ‘MENU/SET’.
«Cannot be used with ‘BURST’ (P.54), ‘STARRY SKY’ (P.44) and ‘AUTO BRACKET’
(P.38, DMC-TZ3 only).
• ‘DATE STAMP’, ‘RESIZE’, ‘TRiMMING’, and ‘ASPECT CONV’ cannot be used with
pictures with audio.
• Settings also reflected in ‘AUDIO REC.’ (P.60) in REC ON CLIPBOARD menu.
Method of measuring exposure (P.38) can be changed.
■Applicable modes: £i(i3«!&e
■Settings:
[Hi : (Multiple: Measures brightness of whole screen. Normally
recommended)
O : (Center weighted: Measures entire picture evenly, with focus on center
of screen)
rn : (Spot: Measures subject within spot metering target)
52
VQT1B61
Spot metering target
VQT1B61
53