Ireen – Panasonic DMC-TZ2 User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

GG-ftneciitig
wilH pthéf '
àsyicei; : :
P
iiriQ fContinyed)
IPrint settings
PRINT WITH DATE
OFF/ON
NUM. 0= PRINTS
Set number of pictures
^
(printer takes priority)
L/3.5”x5”
(89 X 127 mm)
2L/5”«7”
(127 X 178 mm)
POSTCARD
(100 X 148 mm)
PAPER SIZE
A4
(210 X 297 mm)
CARD SIZE
(54 X 85.6 mm)
10x15cm
(100 X 150 mm)
4”x6”
(101.6 X 152.4 mm)
8”x10”
(203.2 X 254 mm)
LETTER
(216 X 279.4 mm)
A (printer takes priority)
/
FI (1 picture,
no
border)
/
PAGE LAYOUT
|E1| (1
picture,
with
border) /
fflffl (2 pictures)
/
gg (4
pictures)
• Items may not be selected if incompatible with printer.
• To print to paper sizes/layouts not supported by this camera, set to ^ and make
settings on the printer.
(Consult your printer’s operating manual.)
e.g. To print the same picture 4 times on 1 sheet
Layout setting: gg (4 screens) Print copies: 4
(Setting print copies to 1 will print 4 different pictures.)
• Date printing
«If printing in shop: Make DPOF settings (P.68) and request printing ‘with dates’.
»If using printer: Make DPOF settings (P.68) and use a printer compatible with date
printing.
«If using the supplied software: Set to ‘with dates’ in the print settings.
«Use the supplied software to print age for ‘BABY’ (P.42) or ‘PET’ (P.44) scene modes,
or days elapsed in ‘TRAVEL DATE’ (P.48). (These cannot be requested in shops.)
«Even if DPOF settings are made, dates may not be printed with some shops or
printers.
«Settings on the actual printer may be prioritized in some cases. Check the date
printing settings on your printer.
«Do not set date printing on pictures onto which ‘DATE STAMP’ (P.66) is applied.
othePA/ise date will be printed twice.
Connecting
with other
devices
ireen
You can view pictures on a TV screen by connecting your camera to your TV with the
supplied AV cable.
Preparations:# Turn off both camera and TV.
• Set the TV aspect (P.22).
3)Connect camera to TV
C2)Turn on TV
#Set to auxiliary input.
If your.iy
.haB
iaiiiSD mérriòry card slot,;you cart
yfew .s’titj ptctufes by.
inserting a card clirèctiy.
Psctùfesmay riot beyiewabterfronisoiTie'.
.■ .MiiltfMediaCards..- .■ .■ .■ .■ .■ .■ .■ .■ .■ .■ .■ .■ .■ .■ .■ .■ .■ .■ .■ .■ .■ .■ .■ .■
C
Note )
#Do not use any other AV cables except the supplied one.
• You can view pictures on TVs in other countries (regions) which use the NTSC or PAL
system when you set ‘VÌDEO OUT’ in SETUP menu. Even if you set ‘VIDEO OUT’ to
‘PAL’, the output signal will still be NTSC in the recording mode.
»Some televisions may cut off the edges of pictures, or not display them full screen.
Pictures rotated to portrait may be blurred slightly.
• Change picture mode settings on TV if aspect ratios are not displayed correctly on
widescreen or high-definition televisions.
• Also consult TV operating manual.
#!f problems such as picture flickering occur, set VIDEO OUT’ (P.22) to ‘NTSC’.
78
VQT1B61
VQT1B61
79