Panasonic DMC-TZ2 - Manual (Page 21)

Applications
(Record)
Takina Dictui CO IIK
—
Using SCENE MODE enables you to take pictures with optimum settings (exposure,
coloring, etc) for given scenes.
Set to ‘SCN1’or‘SCN2’
Select scene, and press ‘DiSPLAY’.
ISCN1 and SCN2
When using SCENE MODE, the camera remembers the previously selected scene.
For example, if SCN1 is set to ‘NIGHT SCENERY’ and SCN2 is set to ‘NIGHT
PORTRAIT’, you can easily switch between settings depending on whether or not there
will be people in the picture.
• To enable pictures to be taken immediately (no automatic SCENE MENU display)
0 Display SETUP menu (P.18)
@ Select ‘SCENE MENU’ (P.22) and set it to ‘OFF’.
•To display scene menu: Press ‘MENU/SET’
(
Note ^
• Selecting a scene mode inappropriate for the actual scene may affect the coloring of
your picture.
• Brightness may be adjusted using ‘EXPOSURE’ (P.38) (except in ‘STARRY SKY’ mode).
• Detailed settings can be made in REC menu (P.50).
(Except in ‘SENSITIVITY’, ‘METERING MODE’, and ‘COL. MODE’)
Certain settings cannot be made for some scenes.
®‘W. BALANCE’ can be set to the following.
‘PORTRAIT’,‘SOFT SKIN’,‘SELF PORTRAIT’,‘SPORTS’,‘BABY’,‘PET’,'HiGH SENS.’
(Setting is restored to ‘AWB’ when scene is changed.)
• The types of flash available (P.36) vary according to the scene.
The scene mode flash setting is reset to the initial setting when the scene mode is
changed.
• Guidelines displayed in grey in ‘NIGHT PORTRAIT’, ‘NIGHT SCENERY’, ‘STARRY
SKY’, and ‘FIREWORKS’ scene modes.
fp/'i i E SOFT SKIN
m
SELF PORTRAIT E3 :.i -Nhv-
m
sponrc
...... -J31
40
VQT1B61 VQT1B61