Panasonic OMNIVISION PV-V4611 - Manual (Page 32)

On-Screen Displays (OSD)
Function & Channel Display
When a function
button is pressed, e.g.
PLAY, or you change
channels, a 4 second
display appears first
in large and then
small characters.
Blank Tape/ No Video
Signal Indication
Whenever a blank section of a tape
comes up in Play mode, or when the
selected channel has no broadcast
signal with the Weak Signal Display
Feature (page 27) set to OFF, the TV
screen will turn solid blue.
VCR Status &
Clock Display
To display or
remove overlay
at right,
--> press DISPLAY.
Function Status Current Time
Channel
Rec Time Remaining
(OTR mode only,
see page 15.)
Broadcast Audio
Being Received
^REC 12:00AM ABC
-0:25 -0:12:34
»STEREO 4 SP,
Counter
Tape Speed
(See page 4.)
Warning and Instruction Displays
These displays will alert you to a missed
operation or provide further instructions.
OSD Caution
P9
OSD Caution
Pf)
NO CH FOUND
PLEASE CHECK ANTENNA
CABLE CONNECTION THEN
PRESS CH UP KEY AGAIN
If no active channels
are found for
CHANNEL
MEMORY...
8
TO CANCEL TIMER REC
PRESS POWER THEN
STOP KEY
If you press POWER
or STOP during a
Timer Recording...
(visible in VCR
mode only)
16
If you attempt to set
VIDEO HEADS MAY
NEED CLEANING
If head cleaning
PLEASE SET CLOCK BY or review a Timer PLEASE INSERT HEAD
becomes
29
PRESSING ACTION KEY
Recording and the
Clock is not set... 16
CLEANING CASSETTE
OR REFER TO MANUAL
necessary while
playing back a
END :PLAY
tape...
TURN VCR OFF
After a Timer
If you press a
function button
Program has
been set...
16 VCR LOCK ACT1VATEO
other than STOP/
27
FOR TIMER RECORDING EJECT or POWER
while the VCR is in
VCR Lock mode...
If you press REC on
REMOTE CONTROL IS SET
If you press an
20
CHECK CASSETTE the remote control or
TO CABLE/DSS MODE
invalid key on the
RECORD TAB
VCR, and a cassette 4 remote while in
21
is inserted with no
USE VCR : VCR KEY
CABLE/DSS
26
record tab... USE TV : TV KEY mode...
If you press PLAY,
14
REMOTE CONTROL IS SET
If you press an
invalid key on the
20
NO CASSETTE FF, REW, or REC on TO TV MODE
PLEASE INSERT A CASSETTE
the remote control or
15 USE VCR : VCR KEY
remote while in 21
VCR without a
cassette inserted...
USE CABLE^SS: CABUEIDSS TV mode... 26
30
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to ; [email protected]