Copying your tapes (dubbing), Connection, Playing (source) vcr – Panasonic OMNIVISION PV-V4611 User Manual
Page 28: Recording (editing) vcr, Selecting the input mode, Copying your tapes, Dubbing), O o o
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Copying Your Tapes
(Dubbing)
Connection
VCR
Front of VCR
VIDE0IN2
L-AUDIO 1N2-R
o o o
(Video In Terminal on the
front of VCR is available)
Connect VIDEO OUT terminal on Playing VCR to VIDEO IN terminal on Recording VCR.
To monitor the dubbing, also connect a TV as shown,
©
Connect “L” and “R" AUDIO OUT terminals on Playing VCR to “L” and "R" AUDIO IN
terminals on Recording VCR (Rear).
In place of a Playing VCR, you can use other equipment, such as a Camcoder.
Simply connect the unit’s AudioA/ideo outputs to the Recording VCR,
©
Playing (Source) VCR
^ Insert pre-recorded tape.
Recording (Editing) VCR
Insert blank tape with record tab.
Press INPUT to set VCR Input mode to LINE1 for
Video Input (Rear) or to LINE2 for Video Input
(Front). (See “Selecting the Input Mode” below.)
Press PLAY, then PAUSE/SLOW
immediately to enter PI_AY/PAUSE mode.
Press REC, then PAUSE/SLOW
immediately to enter REC/PAUSE mode.
The operation of steps 4 and 5 must be done on both
playing and recording VCRs at the same time.
Press PLAY to start dubbing.
Playing VCR starts playback.
Press PAUSE/SLOW to start dubbing.
Recording VCR starts recording.
Press STOP to stop dubbing.
Press STOP to stop dubbing.
To Monitor Dubbing on YourTV
1
Turn your TV on and tune to the Recording
VCR channel (CH3 or CH4).
2
Set the VCR/TV Selector on the Recording
VCR to “VCR "
Dubbing tapes protected with CopytSuard will
have poor quality results.
Selecting the Input Mode
Method 1: Press INPUT repeatedly,
Channel Number<->LINE1 <-->LINE2
Method2:
PressCHA/T. Display will change as below.
C
l ♦-*-2'*-*'3-<-----------------
(C/\BLE)rrV) J
!-^LINE1-*-^125 or 69-*-^
"Lr or “L2" lights on Multi-Function Display
(about 4 sec.) when LINEI or LINE2 is selected.
LINEI : For rear audio/video connection.
LINE2: For front audio/video connection.
^aution: Unauthorized exchanging and/or copying of copyrighted recordings may be copyright Infringement.^
28
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]