Ch.i\!jneu clock auto set – Panasonic OMNIVISION PV-V4611 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
‘Important: If a remote control button does not work when pressed, press
the VCR button on the remote and try the button again.
5
Confirm the output channel of your cable
box or DSS receiver. Press CH
A
▼ Keys
to select the same channel as the cable
box or DSS receiver output channel.
Press ► to enter.
VCR
I
CLOCK
I
CHANNEL
I
CH.i\!JNEU CLOCK AUTO SET
CONNECT Am'ENNA CABLE
AND IF YOU USE A CABLE
BOX. TUNE IT TO YOUR
LOCAL PBS CH THEW,..
PLEASE PRESS CH UP KEY
Turn on your cable box and set it to
your Public Broadcasting Station
(PBS) channel in your time zone.
If you use DSS receiver, it must be
turned off.
6
Press CH
A
Key to start Channel/Clock
Auto Set operation. The Channel/Clock
Setting is performed automatically.
If the setup is completed, the following
screen appears.
f~7cR
r
CLOCK
1
C
hannel
5/137M01 SUN 2:20PH|
POWER
VCR
VCR/TV
SELECT/
SET
A:PLAY
▼ :STOP
►:FF
ACTION
CH
A/T
D5T:ON
CH 10
AUTO CLOCK SET
COMPtETEO
If “Auto Clock Set is Incomplete"
screen appears, set the clock using
MANUAL CLOCK SET procedures
shown on page 9.
VCR [TLOCtTI CHÀKÌNEL
11