Panasonic OMNIVISION PV-V4611 - Manual (Page 15)

Record On a Tape •Important: If a remote control button does not work
' when pressed, press the VCR button on
the remote and try the button again.
STOP
SPEED
CH ▲
CH ▼
Record using VCR controls
1
Insert a cassette.
2
Select
Channel.
I
VCR/ TV
1-----------IILJ----------------
i| 1
1 ■= Fial“ . ‘
Multi Function
Display
4
Press REC
to start
Recording,
5
Press STOP/
EJECT to
stop.
This video recorder, equipped with HQ
(High Quality) system, is compatible
with existing VHS equipment. Only use
tapes with the ICTKI mark. Only tapes
tested and inspected for use in 2, 4, 6,
and 8 hour machines are
recommended.
Ready Check List
□ Alt connections are made (pg. 8, 10, 22).
□ TV and VCR are plugged in.
□ TV is on and tuned to CH3, 4, or VIDEO.
□ Remote is in VCR mode. (Press VCR)
^ Insert tape with rec. tab (pg. 4).
• VCR power comes on.
“VCR" lights on Multi Function Display.
2 Press CH AT, or number keys
to select channel.
• For "LINE" input, see pg. 28.
• For channels over 100, press 100 key then
press the remaining 2 digits,
3 Press SPEED
to select record speed (pg. 4).
SP = Standard Play LP = Long Play
SLP = Super Long Play
* Speedappearson-scteenand on Multi Function Display,
4 Press REC
to start record.
• To edit out unwanted scenes, press PAUSE/
SLOW to pause, and again to resume recording.
5 Press STOP
to stop record.
■ One Touch Recording (record in progress),
• VCR shuts off after preset record length.
—> each press of REC adds 30 min. to
record length up to 4 hours.
I Record one station, watch another,
--> press VCR/TV (“VCR" goes out on Multi
Function Display),
—> select channels at TV (recording
continues).
Watching one channel and
recording another is NOT
possible when using a Cable
Box or a Satellite Receiver.
Select channels at VCR,
• Other channels cannot be viewed during
recording.
—> press VCR/TV ("VCR” lights on Multi
Function Display),
—> select channels at VCR.
* After 5 min. in Pause mode, VCR stops to
protect tape and video head.
15