Copying your tapes (dubbing), Connection, Playing (source) vcr – Panasonic OMNIVISION PV-V4611 User Manual

Page 30: Recording (editing) vcr, To monitor dubbing on your tv, Selecting the input mode, Copying your tapes, Dubbing), O o o

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Copying Your Tapes

(Dubbing)

Connection

VCR

Front of VCR

VIDEOINZ L-AUDIO IN2-R

o o o

(Video In Terminal on the

front of VCR is available)

Connect VIDEO OUT terminal on Playing VCR to VIDEO IN terminal on Recording VCR.

To monitor the dubbing, also connect a TV as shown.

Connect “L” and “R" AUDIO OUT terminals on Playing VCR to “L” and “R” AUDIO IN

terminals on Recording VCR (Rear).

In place of a Playing VCR, you can use other equipment, such as a Camcoder.

Simply connect the unit's AudioA/ideo outputs to the Recording VCR.

Playing (Source) VCR

Insert pre-recorded tape.

Recording (Editing) VCR

Insert blank tape with record tab.

Press INPUT to set VCR Input mode to LINE1 for

Video Input (Rear) or to LINE2 for Video Input
(Front). (See “Selecting the Input Mode” below.)

Press PLAY, then PAUSE/SLOW
immediately to enter PLAY/PAUSE mode.

Press REC, then PAUSE/SLOW
immediately to enter REC/PAUSE mode.

The operation of steps 4 and 5 must be done on both

playing and recording VCRs at the same time.

Press PLAY to start dubbing.
Playing VCR starts playback.

Press PAUSE/SLOW to start clubbing.
Recording VCR starts recording.

Press STOP to stop dubbing.

To Monitor Dubbing on Your TV

Turn your TV on and tune to the Recording

VCR channel (CH3 or CH4).

Set the VCR/ TV Selector on the Recording

VCR to “VCR.”

Dubbing tapes protected with Copy feuard will

have poor quality results.

Selecting the Input Mode

Methodi:

Press INPUT repeatedly,
Channel Number <-> LINEI <-->LINE2

Method2: Press CHA/T. Display will change as below.

----------------------------- V

(CABLE) (TV) J

¡■«■LINEI-^125 or

69*^

• “LI ” or "L2" lights on Multi-Function Display

(about 4 sec.) when LINEI or LINE2 is selected,

• LINEI: For rear audio/video connection.

LINE2; For front audioArideo connection.

^autlon: Unauthorized exchanging and/or copying of copyrighted recordings may be copyright infringement.^

For assistance, please call : 1-S00-211-PANA(7262) or send e-mail to : [email protected]