Remove the scsi interface board, Pack the scanner, Repacking instructions – Panasonic KVS2055L User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Repacking Instructions
It
is
highly
recommended
that
you
keep
the
original
carton
and
ALL
packing
materials.
If
you
need
to
transport or ship your scanner, please follow these instructions.
Please Note:
•
Please use the original carton and all of the original packing materials. If you do not have the original
packing materials, these are available from your Panasonic dealer. Please refer to your service dealer, or call
1-800-833-9626 (U. S. A. only) or your dealer.
• Improper repacking of the scanner may result in a service charge to repair the unit.
• The scanner should be handled in the correct (horizontal) position.
Materials Required :
• Original Scanner Carton & Packing Materials
• Shipping Tape and Scissors
1
2
3
4
5
Disconnect your scanner from the electrical outlet and the interface cable.
Fold the plastic part of the exit stopper and put the exit stopper into the exit
extension tray. Slide the exit extension tray into the pre-imprinter door if it is
pulled out.
Remove the SCSI interface board.
• Please refer to "Installation Instructions for the SCSI Interface Board and SIMM Module".
Attach the screw, fixture and sheet for transportation.
• Please refer to Installation Manual.
Pack the scanner.
40