Panasonic KVS2055L - Manual (Page 24)

Display Panel Instructions
Setting the language
1
Turn the power on while pressing
the HOME key.
2
3
Use the ▲ key or the ▼ key to
select "English", "Japanese" or
"German".
Press the HOME key.
• The display will change to the
selected language, then the scanner
will be ready.
• This setting will remain until it is
changed to another setting.
E n g 1 i s h
G e r m a n
D e u t s c h
B e r e i t
Other display explanations
Display Content
^_c__ a_n_n_i_n__g_^_^_^
This will be displayed when scanning is started until it is
completed.
After completion, "Ready" will be displayed.
S_t_o^jp__p_I_n__g_:_:_______ !_t [
1 2 3 4 5 6 7 8
W
If the STOP key is pressed, scanning will stop. This will be
displayed when the STOP key was pressed during scanning.
Even if the STOP key is pressed in a setting mode, this will
be displayed. Then the scanner will return to setting mode
after stopping scanner operation.
S c a n n e r S t o p p e d
1 2 3 4 5 6 7 8
This will be displayed when the STOP key is pressed and
the scanner stops.
Even if the document remains in the scanner, "JAM" will
not be displayed.
If the document remains in the scanner, open the front door
and remove it.
Then "Ready" will be displayed.
P r e s s S T A R T K e y
This will be displayed after setting scanning to start with a
host computer.
If the document is set and the START key is pressed,
scanning will start.
Upper display in each cell is in English and lower one is in German.
24