Panasonic SCAK50 - Manual (Page 17)

Listening to tapes
Type of tape which can be played correctly:
The unit automatically identifies the type of tape.
NORMAL POSmON/TYPE 1 О !
HIGH POSITION/TYPE II О
METAL POSITION/TYPE IV
_______ о_______ i
You can use either deck 1 or deck 2 for tape playback,
□
Press TAPE DECK 1/2.
The power will come on automatically.
Press DECK 1 ± OPEN or DECK 2 ± OPEN, and
then insert the tape.
Insert the tape with the exposed tape facing down.
Close the holder by hand.
Press DOLBY NR.
You have to turn DOLBY NR ON/OFF according to the type
of recording you made.
Every time you press the button: p □□ nr (OFF) —|
Press REV MODE to select the reverse mode.
Every time you press the button;
z:> -* cz^
j
* ; One side is played, then playback stops automatically.
■ Both sides (front side reverse side) are played one
time each, then playback stops automatically.
: Both sides are played 8 times each, then playback stops
automatically.
Press or ^ to start playback.
: The forward side (front side) will play.
: The reverse side will play.
Adjust the volume level.
To stop tape playback
Press ■.
To change the deck to be used Q
Press TAPE DECK 1/2 to select the deck you want to use when you
load cassettes into both decks.
To listen to 2 tapes consecutively
Load a tape into each deck and select Both tapes will be played
8 times each.
сна
Playback is interrupted while playing back tapes, if you open the
other deck.
One-touch play
When power is OFF, playing starts automatically when you press
TAPE DECK 1/2.