Panasonic SCAK50 - Manual (Page 14)

Ustening to compoct discs
Program play
b}/ control onh/
You can program up to 24 track.
m Press CD.
Press PROGRAM.
Press DISC.
(within 10 seconds or so)
Press 1-5, whichever disc you want.
Press the numeric button to seiect the desired track.
□
Repeat steps 3 through 5 until you have programmed
ail the tracks you want.
Press ► .
Play will start in the programmed sequence.
To cancel program play mode
Press PROGRAM in the stop mode.
Programmed contents will be saved in memory.
Pressing ■ will cancel program play, but it will also erase the entire
program.
To select a two-digit track
Press 510 and then the two numbers you want.
For example
Track no. 20: >10—*2—*0
Track no. 35: S10-+3—*5
When “CD FULL” appears
The number of programmed tracks is limited to 24. No further tracks
can be programmed.
You can do the following during program mode Q
• Check program contents.
Press or
Everytime you press one of the buttons, the track and program
No. are shown on the display.
• Add to the program.
Repeat steps 3 through 5.
• Cancel entries.
From the last pro­
grammed track.
Press CANCEL,
A specified track
only.
Select the track with or ►►/
►►1, and press CANCEL within 3
seconds.
All tracks. Press ■.
Memory retention
Your program is retained in memory for about 2 weeks while the
system is unplugged.
To replay your program
If vou turn OFF your program with PROGRAM, you can play it
again as explained below.
1. Press PROGRAM.
2. Press ►.
If you program a track not on your CDs
The track is initially programmed, but during program plav, the player
will skip that track and will continue playing from the next
programmed item.