Connections you'll need to make, Gy \ insert a blank tape, Push rec and play at the – Panasonic OMNIVISION PV-S4670 User Manual
Page 22: Selecting the input mode, Copyingydurjkges, Caution, Into the playing (source) vcr, With record tab into the recording (editing) vcr, On playing vcr, At the point you want to start copying
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
log
CopyingYDurjkges^^
Connections you'll need to make.
• on the editing S-VHS VCR, set the S-VHS selector to on.
TV for Monitoring
Recording (Editing) VCR
Playing (Source) VCR
CS-Video liQ
S-VHS Connecting Cable
CAudlo ln(L/Ri) / CS-VIdeoOuO CAudl°9.H?<^ Cs-VIdeo Out:)
CAudloTn(L/R
Cvideo Irt)
Insert a pre-recorded
tape
into the Playing
(Source) VCR.
1/f Ч
I
r
i
L
—
l
ì
gy \
Insert a blank tape
fc
J
with record tab into the
Recording (Editing) VCR.
Select Input “LINE”
on the Recording
(Editing) VCR. (See “Selecting the
Input Mode” at right.)
Push PLAY
on Playing VCR.
Push PAUSE
at the point you
want to start copying.
Push
REC
and PLAY
at the
same time on Recording VCR.
Push PAUSE
immediately.
Push PAUSE
on both
VCRs (at the same time),
to begin copying.
Edit Out Unwanted Parts
of the original recording by using the PAUSE button
(on the Recording unit) while copying is in progress.
Push STOP
on both
VCRs to stop copying.
^
Caution:
Unauthorized exchanging and/or copying of copyrighted
i^^recordings may be copyright infringement._____________
22
To Monitor the Re-Recording
1
Turn the TV on and select its VCR channel
(CH3 or CH4) on the Recording VCR.
2
Set the VCR/TV selector on the Recording
VCR to the “VCR” position.
Selecting the Input Mode
1
Push MENU to display
the menu.
2
Rotate and push the Wheel
to select SET UP VCR.
3
Rotate the Wheel to
select “INPUT SELECT’,
and then push to choose
TUNER or LINE.
• You can also select “LINE"
using the VCR CH
A/T
buttons. The numbers will
change in the order shown.
1 — 2 — 3------
----------------- MENU ......................
SET CU
SET UP CHANNEL
Ш ЮМА/LANGUE: ENGLI SH
SELECT
SET
END
ROTATE YiHEEL
PUSH WHEEL
PUSH MENU KEY
I..........
SET UP VCR
.............. I
REPEAT PLAY ; ON
BEEPER______ ■ ON
; LINE
SET AUDIO MODE
SELECT
SET
END
ROTATE WHEEL
PUSH WHEEL
PUSH MENU KEY
c
—LINE-
(CATV)
— 125 or 69
D
] i
When LINE is selected, “L" is displayed in the Multi
Function Display for about 4 seconds.
If one of the VCRs you are using is a
conventional VMS VCR, connect the VIDEO
OUT terminal of the Source VCR and the VIDEO
IN terminal of the Editing VCR using the Video
Cable, instead of the S-VHS Connecting Cable.
Refer to the TV Operating instructions for
connection of the TV.
NOTE