Panasonic OMNIVISION PV-S4670 - Manual (Page 17)

Playback a Tape
1^^Check list before you begin
□ All connections are made.
(See pages 6-9.)
□ TV and VCR are plugged in.
□ TV is turned on and set to the VCR
channel (CH 3 or 4).
SLOW
Caution:
Please inspect your cassette tape for
any loose or peeling labels as it may
become jammed in your unit.
Insert a cassette.
• VCR power comes on automatically.
This indicator lights in the
Multi Function Display.
X I ✓
-VCR-
PLAY
Push PLAY to start playback.
• Playback begins automatically if
cassette has no record tab.
(VCR or Remote Control)
REW j ®
or
FF/©
B)
(VCR or Remote Control)
Push REW or FF to
quickly locate a scene.
• SP mode tapes have a search speed of
9 times and SLP mode tapes 27 times
the normal speed.
• Some noise bars will appear during search.
Push STOP to
Stop
Playback.
(VCR or Remote Control)
Push STOP/EJECT to eject the cassette.
• This button only on VCR.
Special Effects During Playback
These features work best in SP or SLP i mode. The sound will be muted.
(After the VCR is in the Still or Slow mode for 3 minutes, it wilt go into the Stop
mode automatically to protect the tape and video head.)
Slow Motion Playback
Push SLOW to start and PLAY or SLOW to release the Slow mode.
Still (Freeze) Frame Picture
Push PAUSE to freeze and release the picture.
• To reduce picture noise:
Place the VCR in Slow motion mode. Use TRACKING A/T to clear up
the picture, then Push PAUSE.
Frame by Frame Advance
While in Still mode, hold down SLOW to advance the still picture one
frame at a time. Push PAUSE to release.
Feature for a Quality picture
Plaital Auto Picture
This feature automatically controls the video output signal for less noise
depending on the tape condition.
Digital Auto Tracking
This feature continuously analyzes the signal and adjusts for
optimum picture quality.
Manual Tracking Control
Use during Playback and Slow Motion mode to reduce picture noise.
Push VCR CH (TRACKING) A/T buttons until the picture clears up.
To return to Auto Tracking mode, push VCR POWER off and then on again.
V-Lock Control
In Still mode, the VCR CH (TRACKING) A/T buttons operate as a
V-Lock control to reduce jitter. Push A/Tuntil the picture is stabilized.
DynAmorohous™ Metal Head/
CNR fColor Noise ReductlonV ANR (Advanced Noise Reduction)
DynAmorphous™ Metal Head increases playback and record picture
quality. Color Noise Reduction reduces the color noise. Advanced
Noise Reduction reduces the luminance noise.
17