Panasonic Panafax UF-311 User Manual

Page 64

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Cleaning the Scanning

if the receiving party reports that the received documents were black,

Plate and Scanning Glass

or contained black lines, try making a copy on your unit. If the copy is

black or has black lines, the Contact Image Sensor unit or the Scanning

Roller is probably dirty or defective and must be cleaned.

To clean the Scanning Plate or the Scanning Glass, follow the

procedure below,

1. Push the Latch Button on the upper left side of the Control Panel

and open the ADF Door.

Wipe the Scar>ning Plate and Scanning Roller gently with a soft

cloth. Be sure to use a clean cloth, the Scanning Glass can be easily
scratched.

Scanning Plate

3. Close the ADF Door.

7 - 8