Note – Panasonic Panafax UF-311 User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4.2.4.
HOWTO SET/USE
AUTO SWITCHING MODE
(FAX/TEL AUTO SWITCH)
Setting the
Auto Switching Mode
(Fax/Tel Auto Switch)
When your machine is set to this mode, your machine will switch to
document reception or voice communication automatically.
Set Fax Parameter No.11 TAM l/F to
1
: None. (See page 3-6)
Press the FAX/TELEPHONE key and confirm that the lamp is
flashing. This indicates that the machine is now set for the Auto
Switching Mode.
^ FAX/TELEPHONE
Operation of
Auto Switching Mode
(Fax/Tel Auto Switch)
Your machine will soon answer the call when a call is received,
then distinguish whether it is a voice or fax call.
If the call is a Fax call.
в'
Your machine begins to
receive the document.
If the call is a Voice call.
You machine begins
making beep-beep-beep
sounds through the
machine's speaker.
Lift the phone and
SPACE
TEL/DIAL
Talk.
NOTE
T/ie
calling party will
be
charged for
the call even though you are not
available to answer the call when this
modeissetto "Valid".
4 - 1 1