Panasonic Panafax UF-311 - Manual (Page 40)

Setting the
Auto Switching Mode
(TAM Interface)
Set Fax Parameter No.11 TAM l/F to 2: Connected,
(See page 3>6)
/1 Press the FAX/TELEPHONE key and confirm that the lamp is
12 7 flashing. This indicates that the machine is now set for the Auto
\/ Switching Mode.
FAX/TELEPHONE
Operation of
Auto Switching Mode
(TAM Interface)
When your TAM and Fax receives an incoming call, the TAM
always answers the cajl first and then the TAM sends an OGM
(Outgoing Message) recorded in your TAM to the calling
station.
During the time theTAM is answering the call, your fax machine
will be monitoring the line to distinguish whether it is a voice or
fax call.
If the call is a Fax call.
Your machine will switch
the line to the fax and
then beginsto receive
the documents
immediately from
calling station.
If the call is a Voice call.
Your TAM continues to
record a message (ICM)
after sending out an
OGM.
Sample of OGM
"Hello, this is Smith. I am sorry but I cannot come to the phone right
now. Please leave your message after the beep. I will call you back as
soon as possible. This telephone is connected to a Panafax machine
also. If you want to send a fax message, please send it now. Fax will
answer automatically. Thank you for calling.
4 - 1 3