Information codes, Information codes -4 – Panasonic Panafax UF-311 User Manual
Page 60
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Information Codes
When something unusual occurs, the display may show one of the
Information Codes below. These will help you fix the problem.
Info. Code
Meaning
Action
001/002
Recording paper jam.
Remove jammed paper.
(See page 7-6)
010
No recording paper.
To load the paper,
(see page 2-7)
014
Print Cartridge is not attached.
Attach the Print Cartridge,
(see page 2-5)
015
Out of Ink.
Replace the Print Cartridge,
(see page 7-9)
030
Document misfeeding.
1. Reload the document properly, (see
page 4-2.)
2. Remove document jam. (see page 7-7.)
3. Adjust ADF. (see page 7-12.)
03l‘
Document paper is too long or jammed.
Document length exceeds 78.8 inches {2
meters).
1. Reload the document properly, (see
page 4-2)
2. Remove document jam.
(see page 7-7)
060
Cover is opened.
Close the Cover.
061
ADF Door is opened.
Close the ADF Door.
400
During initial handshake, receiving station
did not respond or communication error
occurred.
1. Check with other party.
2. Reload the document and send again.
402
During initial handshake, communication
error occurred.
Reload the document and send again.
403
No polling capability at the remote side.
Ask remote side to set
'"POLLBDsON'".
404/405
During initial handshake, communication
error occurred.
Reload the document and send again.
407
No confirmation from the receiving
station for the previous page sent.
Wait a few minutes and send again.
408/409
Remote side confirmation of previous
page is illegible.
Wait a few minutes and send again.
411
Polling password does not match.
Check polling password,
(see page 5-1)
412
No data from the transmitting side.
Check with the other party.
414
Polling password does not match.
Check polling password,
(see page 5-1)
415
Polling transmission error.
Check polling password,
(see page 5-1)
416/417
418/419
Received data has too many errors.
Check with the other party.
420
Machine goes to receiving mode, but
receives no command from the
transmitting side.
1. Remote side misdiat.
2. Check with the other party.
422/427
Interface is incompatible.
Check with the other party.
430/434
Communication error occurred while
receiving.
Check with the other party.
436/490
Received data has too many errors.
Check with the other party.
492/493
494
Communication error occurred while
receiving.
Check with the other party.
495
Telephone line disconnected.
Check with the other party.
7 - 4