Panasonic Panafax UF-311 - Manual (Page 46)

5 . 2 .
TIMER CONTROLLED
TRANSMISSION
How to Set Timer
Transmission
NOTE
1. ffyou enter a wrong number in
Step 3. press CLEARKOPY, then
re-enter the right number,
2. If you wish to perform Timer
Transmisión without storing into
memory (memory may not be big
enough for storing the entire
document), skip step 5 and enter
only one station in step 6, In this
case the document wili remain on
the ADF for Timer Transmisión at
step 7,
3. you cannot use direct dialling in
Step 6. All called stations for
Timer Controlled Transmisión
must
be set in advance in One-
Touch/ABBR. Numbers.
4. To cancel the Deferred
Communication settings, see
page 5-3.
You can send a document to one or multiple stations at any fixed time
within 24 hours by a Built-in timer. This machine has one timer for
Timer Controlled Transmission,
Place the document face down on the
ADF. Adjust the Document Guides.
TIMER
12-06-1992 12:00
Enter start time from keypad.
(Use four-digit, 24-hour clock)
Ex; 0230
^ START
02:30
C- 3
MEMORY
(See NOTE 2)
Dial by pressing a One-Touch key,
ABBR and two-digit code or any
combination of these.
Ex: One-Touch 02
ABBR and 15
^ START
n
to store the document
into the memory.
C02] 9-SSS1234 1
[15] 9-7824831 1
□ □□□□
The TIMER and MEMORY lamp will be
lit until transmission actually takes
place.