Panasonic Panafax UF-311 - Manual (Page 26)

3 . 3 .
FAX PARAMETERS
Setting Fax Parameters
Your facsimite machíne has a variety of adjustable Fax Parameters,
These parameters, listed in the Parameter Table, are preset for you
and do not need to be changed. If you do want to make a change,
read the table carefully. Some parameters, such as the Resolution and
Original parameters, can be temporarily changed by a simple key
operations Just before a transrnission is made. When the transmission
ends, however, these parameters return to their preset values (Home
position). Other parameters can only be changed by the procedure
described below.
SET TONE
Enter Fax Parameter number from the
Fax Parameter Table (see page 3-7)
EX: 01 for RESOLUTION
The number showing inside the
brackets is the standard setting and
the number blinking on the right is the
current setting.
Enter the new setting value.
EX: 2 for FINE
oi Cl] 1 I
01 [13 2
V ^
Return to Step 2 to change another
parameter, or, to return to standby,
press STOP.
NOTE
1 To print out a Fax Parameter List, see
page 6S.
2. The buiit-in battery can back up Fax
Parameter settings up to todays
when a power failure occurs.
3. If you entered a wrong number in
steps, re-enter the correctnumber
over ft.
3 - 6