Panasonic Panafax UF-311 - Manual (Page 25)

NOTE
1. If you want to change the
telephone number/station name
a fter it is set, go to Step 3 or 5 then
use < (ORIGINAi}and >
(RBSOLUTIOW keys to move cursor
to the number/characteryou want
to change and enter the new
number or character
2. To print out a One-Touch/ABBR.
Oiaiiing Number List, see page 6-6.
3. The built-in battery can back up the
One-Touch/ABBR.Numbers up to 10
days when a power failure occurs.
Enter receiving station's name (up to 15
characters) using the Character Code
Table on page 8-3.
(Press SET after entering the two-digit
code for each character.)
EX; EFGHIJKL
14#15#16#17#18#T9#20#21 #
To set the name,
^ START
[
Repeat Steps 2a/2b to 6 to record more
numbers, or, to return to standby, press
STOP.
00000000
Filling Out the Station
Directory Sheet
Use a pencil or a ball-point pen to fill in the station directory with
station names corresponding to the One-Touch keys. The station
directory sheet is held in place by a transparent plastic cover sheet.
To remove the station directory sheet,
1) Push the transparent plastic cover sheet downward until it is bent
enough to take out.
2) Remove the transparent plastic cover sheet together with the
station directory sheet
NOTE
If you use a pen, be sure the ink is dry.
If you use a pencil, remove any excess
lead before repladng the station
directory.
To replace the sheet,
1) Set the station directory sheet into proper position.
2) Place the transparent plastic cover sheet over the station
directory sheet and insert the projections while bending the
sheet.