Panasonic CY-V7100U - Manual (Page 32)

Installation
(continued)
O Hollow out the headrest.
# Draw a frame along the outside of the trim plate 0 with an
oil pen.
Draw two diagonal lines.
Cut the surface along the diagonal lines with a cutter. (Never
cut the surface along the outer frame.)
Cut the stuffing material along all the way of the line drawn
in # - # under the flapping surface material to an appro­
priate depth so that the mounting tray 0 can be embedded
while raising the flapping surface material. Remove the stuff­
ing material from inside the cut rectangular parallelepiped
with your hand.
3 2
CY-V7100U